Iogear GMFPSU22W6 Guide d'installation télécharger pdf (Page 9)

Hardware Installation

Make sure that your USB devices are switched off and that the server’s power adapter is disconnected.

Connect the print and/or storage devices to the server’s USB ports.

Connect the server to the network with the included Ethernet cable.

Turn on the USB devices and make sure they are ready for use.

Connect the power adapter to the server. The power indicator will light up and USB1 and USB2 indicators

will ash in turn. When the Link indicator lights up, the Server is correctly connected to the network. When

USB1 and USB2 indicators do not ash, the Server is working normally.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Pas de commentaire

Iogear GMFPSU22W6 Guide d'installation Page 9