Iogear GIC711SW6 Manuel d'utilisateur télécharger pdf (Page 7)

Software Installation

Windows XP Driver Installation

1. Before installation, copy all the les under directory [CD Drive Letter]:\SATA Non-Raid_2Port\ Sil3x12\

Win98_me _2000_xp_nt4.0\driver\ *.* to a blank oppy disk.

2. After the SATA PCI Host Adapter and attached drives are congured, follow Microsoft procedures to

install Windows accordingly.

3. At the Windows Set-up screen, press F6 in order to specify and add the driver.

4. Insert the Driver diskette. Press S then press Enter.

5. Select Silicon Image Sil-3x12 SATALink Controller Driver and press Enter.

6. Press Enter to continue and follow the on-screen instructions to complete Windows XP installation.

Note: When the Software Installation warning pops up, click Yes. And when the Hardware

Installation warning pops up, click Yes again.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Pas de commentaire

Iogear GIC711SW6 Manuel d'utilisateur Page 7