1GPSU21InstallationInstallation Guide1-port USB 2.0 Print Server
1011A wizard will guide you through the entire 2. process for Windows XP computers. Click Next to continue.
1011The wizard will scan your network for the 3. print server and display and results in the list. If no server is found, disable all rewall softwar
1213Changing the network settings of the print 4. server to a xed IP address is not necessary but will provide more performance stability, especially
1213Here you can specify the network settings 5. the print server will use. If you will be printing from the Internet, it is important that the Gatew
1415All existing printers installed on your 6. computer will show up in this list. Select the model that is now attached to the print server and cli
1415If you get the following message, the print 7. server’s IP settings are not set up correctly for your network. Click Back until you see the screen
1617Setup of your print server is now complete.10. Click Finish to close the wizard.Setup of your print server is now complete. 9. Click Finish to clo
1617Software Installation – Windows VistaImportant Note: Please make sure your printer driver is properly installed on your system before installing t
1819The installation wizard will take you through 2. the installation process for Windows Vista computers. Click Next to continue.The installation wi
1819The print server setup wizard will then guide 4. you through the entire process on Windows Vista computers. Click Next to continue.
23
2021The wizard will scan your network for the 5. print server and display and results in the list. If no server is found, disable all rewall softwar
2021Changing the network settings of the print 6. server to a xed IP address is not necessary but will provide more performance stability, especially
2223Here you can specify the network settings 7. the print server will use. If you will be printing from the Internet, it is important that the Gatew
2223Review the settings you have entered 8. carefully and click Next to conrm that they are correct and save them to the print server.
2425All existing printers installed on your computer 9. will show up in this list. Select the model that is now attached to the print server and clic
2425A summary screen will show the name of 10. printer to be modied and the IP of the print server which will be used. If this information is correc
2627Setup of your print server is now completed. 11. Click Finish to close the wizard.
2627Software Installation - MacSoftware Installation - MacNo software from the Setup CD is needed on 1. Macintosh systems. Simply open the Print and F
2829Select the LPD protocol, then type in the IP 3. address of the print server. Type “lp1” with lowercase letters for the name of the Queue. Name the
2829Setup Internet Printing – Windows XPSoftware Installation - IPPTo print from a remote location, you will rst 1. need to make sure port 631 is for
23WelcomeThank you for purchasing this 1-port USB 2.0 Print Server that allows any networked computer to share a USB printer. It complies with USB 2.0
3031Select the option for a network printer, then 3. click Next.Select the option to connect to a printer on 4. the internet, and type in the full IPP
3031The wizard will ask you to choose the model 5. of your printer. Click OK when you have chosen the appropriate driver.Click 6. Finish to complete
3233Setup Internet Printing – Windows Vista Click on the Vista logo, select Control Panel, 1. then double click on Printers. Click on Add a printer t
3233Since we are setting up a new IPP connection, 3. click on The printer that I want isn’t listed to continue. Select the option 4. Add a printer us
3435From the Device type drop down menu, 5. select TCP/IP Device from the list. For the Hostname or IP address, please put in “http://(router ip):631
3435If you get the following message, please 6. select the correct network card from the Standard drop down menu. If you are connecting through stan
3637If you had installed the driver for your printer, 7. then select the manufacturer of your printer from the Manufacturer list and select the correc
3637If you already have the driver installed, then 8. select the option Use the driver that is cur-rently installed (recommended) and click on Next to
3839You can choose to print a test page by click-10. ing on the Print a test page to verify the connection is established correctly. After a test pag
3839Technical SupportIf you need technical support, please check out our IOGEAR Tech Info Library (TIL) at http://www.iogear.com/support for the late
45Table of ContentsPackage Contents 5Features 6System Requirements 7Hardware Installation 8Software Installation – Windows XP 9Software Installation
4041Federal Communications Commission (FCC) Statement15.21You are cautioned that changes or modications not expressly approved by the part responsibl
4041Operation is subject to the following two conditions:this device may not cause interference and1. this device must accept any interference, includ
4243This device has been tested and found to comply with the requirements set up in the council directive on the approximation of the law of member st
4243Limited WarrantyIN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM
4445ContactIOGEAR, INC.23 HubbleIrvine, CA 92618 P 949.453.8782F 949.453.8785Visit us at: www.iogear.com©2009 IOGEAR®. All Rights Reserved. PKG-M1102
4445
4647
FUNIOGEAR offers connectivity solutions that are innovative, fun, and stylish, helping people enjoy daily life using our high technology products.GREE
45Package ContentsThis package should contain:1 USB 2.0 Print Server1 CAT5 Patch Cable1 Power Adapter1 Installation CD1 User Manual1 Warranty/Registra
67FeaturesEasily connects your USB printer to a network• Allows multiple computers to share one USB printer on the network• Print from any computer on
67System RequirementsThis USB 2.0 Print Server supports:Windows 2000/XP/2003• W indows Vista 32 / 64-bit OS• Mac OS 9.22 or later• Unix/Linux• Printer
89Hardware Installation Connect a USB cable from the printer to the 1. USB port on the print server.Connect one end of the ethernet patch cable 2. to
89Software Installation – Windows XPImportant Note: Please make sure your printer driver is properly installed on your system before installing the so
Commentaires sur ces manuels