Iogear GCS1208 Manuel d'utilisateur télécharger pdf (Page 31)

F6: BRC

This function will only be shown if you have logged in as an Administrator. Simply press [F6]

to trigger the Broadcast (BRC) Mode, then you will see a speaker symbol next to the port

number. When BRC is activated, your command that you send from the console will be sent

to all available computers – the computers that are listed in the OSD main screen, please go

to F2 – LIST section for details. During BRC Mode, console mouse will not function normally.

WhenBRCmodeisineffect,theScrollLockLEDashes,itstopsashingwhenyouexit

BRC. To exit BRC, simply press [F6].

F6: BRC

F7: SCAN

ClickingtheF7eldorpressing[F7]invokesAutoScanmode.Thisfunctionallowsyouto

automatically switch among the available computers at regular intervals so that you can

monitor their activity without having to take the trouble of switching yourself.

• The selection of computers to be included for auto-scanning is made with the Scan–

Skip mode setting under the F3: SET function (see page 20).

• The amount of time that each port displays for is set with the Scan Duration setting un-

der the F3: SET function (see page 20). When you want to stop at a particular location,

press the [Spacebar] to stop scanning.

• If the scanning stops on an empty port, or one where the computer is attached but is

powered Off, the monitor screen will be blank, and the mouse and keyboard will have

no effect. After the Scan Duration time is up, the scan function will move on to the next

port.

• As each computer is accessed, an S appears in front of the port ID display to indicate

that it is being accessed under Auto Scan mode. When the port ID with the symbol

displays, the background screen is blank.

• While Auto Scan mode is in effect, the console will not function normally. You must exit

Auto Scan mode in order to regain control of the console.

• While you are in Auto Scan mode, you can pause the scanning in order to keep the

focus on a particular computer either by pressing P, or with a leftclick of the mouse.

• To exit Auto Scan mode, press the [Spacebar] or [Esc].

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

Pas de commentaire

Iogear GCS1208 Manuel d'utilisateur Page 31